EOL: NEI-30 Dinion IP Infrared Imager

NEI-30 Dinion IP Infrared Imager
  • Certified all-weather active IR surveillance camera specifically designed for perimeter surveillance and other outdoor low-light applications
  • Dinion 2X imaging with wide dynamic capability to handle the most demanding lighting situations
  • Variable Field Illumination technology provides unmatched low-light and no-light performance
  • Integrated junction box, remote control, and complete external adjustments minimize installation time and cost
  • Tri-streaming: Dual H.264 and M-JPEG simultaneously
  • Intelligence at the edge
  • ONVIF conformant
  • Power over Ethernet Plus (IEEE 802.3at, class 4 compliant)
  • Details
    Rated Voltage 12 VDC (± 10%), 24 VAC (± 10%), 50/60 Hz, Power over Ethernet +
    Power Consumption
    at 12 VDC 35 W (2.9 A)
    at 24 VAC 35 W (1.5 A)
    Sensor
    CCD Type 1/3-in. interline, WDR dual shutter
    Active Pixels: PAL: 752 x 582 NTSC: 768 x 494
    Video
    Video compression H.264 (ISO/IEC 14496-10); M-JPEG, JPEG
    Data rate 9.6 Kbps to 6 Mbps
    Resolution Horizontal x vertical (PAL/NTSC ips)
    4CIF 704 x 576/480 (25/30 ips)
    CIF 352 x 288/240 (25/30 ips)
    Overall IP Delay Min. 120 ms, Max. 240 ms
    GOP structure I, IP
    Frame rate 1 to 50/60 (PAL/NTSC) H.264 1 to 25/30 (PAL/NTSC) M-JPEG
    Video Out
    Signal Analog composite (NTSC or PAL), for use with OSD menus only4
    Connector BNC, 75 Ohm
    Horizontal resolution 540 TVL
    Video S/N 50 dB
    4. The analog video output is active only when interacting with the imager’s OSD menus. Note that when analog video output is active, the IP video output is interrupted.
    Sensitivity (3200 K, scene reflectivity 89%, F1.2)
    Full video (100 IRE) Usable picture (50 IRE) , Usable picture (30 IRE)
    Color 2.4 lx (0.223 fc) , 0.47 lx (0.044 fc) , 0.15 lx (0.0139 fc)
    Color + SensUp 10x 0.24 lx (0.0223 fc) , 0.047 lx (0.0044 fc) , 0.015 lx (0.0014 fc)
    Monochrome 0.98 lx (0.091 fc) , 0.188 lx (0.0174 fc) , 0.06 lx (0.0056 fc)
    Monochrome + SensUp 10x 0.098 lx (0.0091 fc) , 0.019 lx (0.0017 fc) , 0.006 lx (0.0006 fc)
    Monochrome + IR Illumination 0 lx (0 fc) , 0 lx (0 fc) , 0 lx (0 fc)
    Power
    PoE+ RJ-45 100 Base-TX Ethernet PoE+ IEEE 802.3at, class 4
    Imager 12 VDC/24 VAC (± 10%), 50/60 Hz
    Analog (video) PAL or NTSC BNC, for use with OSD menus only5
    Video and Control STP, 10/100 Base-T, auto-sensing, half/full duplex, RJ45
    On-screen Display OSD with soft-key operation (multilingual)
    Alarm Output Relay 30 VAC or +40 VDC, max. 0.5 A continuous, 10 VA Tamper: Open/close, normally closed voltage free relay
    5. The analog video output is active only when interacting with the imager’s OSD menus. Note that when analog video output is active, the IP video output is interrupted.
    Horizontal Resolution 540 TVL
    Signal-to-Noise Ratio >50 dB
    Shutter Auto (1/50 [1/60] to 1/10000) selectable Auto (1/50 [1/60] to 1/50000) automatic flickerless, fixed selectable
    Sensitivity up Adjustable from Off up to 10x
    Day/Night Color, Mono, Auto Video, Auto Photocell
    Day/Night Photocell Control Day/Night switch adjustable: 25 lux to 64 lux (default at 48 lux) Night/Day switch adjustable: 43 lux to 82 lux (default at 63 lux)
    Auto Black Automatic continuous, Off
    Dynamic engine XF-Dynamic, 2X-Dynamic, SmartBLC
    Dynamic range 120 dB (20-bit image processing)
    Dynamic Noise Reduction Auto, On/off selectable
    Sharpness Sharpness enhancement level selectable
    SmartBLC On (includes 2X-Dynamic ) / Off
    AGC AGC On or Off (0–30 dB) selectable
    Peak White Invert On/Off
    White Balance ATW, ATWhold and manual (2500 to 10000K)
    Alarm Output VMD or D/N and dedicated Tamper (for junction box)
    Cable Compensation Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with Bilinx coaxial communication)
    Camera ID 17 character editable string, position selectable
    Test Pattern Generator Color bars 100%, Grayscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane
    Lens 5–50 mm IR-corrected Varifocal auto-iris
    Angular Field of View(H x V) 5 mm FOV: 51° x 40° 50 mm FOV: 6° x 4°
    Modes 6 preset programmable modes
    Video Motion Detection One area, fully programmable
    Privacy Masking Four independent areas, fully programmable
    Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP, SNTP, SNMP, 802.1x, UPnP
    Encryption TLS 1.0, SSL, AES (optional)
    Ethernet STP, 10/100 Base-T, auto-sensing, half/full duplex, RJ45
    PoE+ supply IEEE 802.3at, class 4
    Unit Configuration Via web browser or Configuration Manager
    Flicker Control 50/60 Hz, selectable
    Software update Flash ROM, remote programmable
    LEDs 7 SMT type LED array with Variable Field Illumination
    Beam Patterns (H x V) Wide beam: 42° x 10° (with 3D diffuser) Narrow beam: 10° x 10°
    Wavelength 850 nm or 940 nm
    Intensity Adjustment 31 step adjustments from min. to max.
    On/Off Control Slave to camera mode Manual on/off control via OSD and IP Interface
    Illumination Tilt Adjustment Maximum: 13° tilt above camera axis Minimum: 3° tilt above camera axis
    850 nm 940 nm
    Range HFOI , Range , HFOI
    Detection 160 m (525 ft) , 28 m (90 ft) , 80 m (260 ft) , 14 m (45 ft)
    Classification 120 m (390 ft) , 21 m (70 ft) , 60 m (195 ft) , 10 m (35 ft)
    Recognition 90 m (295 ft) , 16 m (50 ft) , 45 m (150 ft) , 8 m (25 ft)
    Identification 50 m (165 ft) , 9 m (30 ft) , 25 m (80 ft) , 4 m (15 ft)
    850 nm 940 nm
    Range HFOI , Range , HFOI
    Detection 140 m (455 ft) , 24 m (80 ft) , 70 m (230 ft) , 12 m (40 ft)
    Classification 105 m (340 ft) , 18 m (60 ft) , 52 m (170 ft) , 9 m (30 ft)
    Recognition 80 m (255 ft) , 14 m (45 ft) , 40 m (130 ft) , 7 m (20 ft)
    Identification 45 m (140 ft) , 8 m (25 ft) , 22 m (70 ft) , 4 m (10 ft)
    Dimensions (H x W x L)
    Camera and Bracket 402 x 193 x 309 mm (15.8 x 7.6 x 12.2 in.)
    Total Assembly 402 x 193 x 406 mm (15.8 x 7.6 x 16.0 in.)
    Weight
    Camera without Junction Box 6.6 kg (14.5 lb)
    Junction Box 1.4 kg (3.1 lb)
    Construction Corrosion-resistant aluminum
    Color RAL 9010 pure white with RAL 9005 jet black detail
    Finish Wet paint
    Window 3.3-mm (1/8-in.) thick glass
    Bracket Corrosion-resistant, cable-managed
    Bracket Pan/Tilt Range Pan: ±90° Tilt: -48°/+44°
    Junction Box Separate from bracket allowing for wiring and cabling prior to camera installation
    Operating Temperature
    Standard6 –40°C to +50°C (–40°F to 122°F)
    With PoE+ Input6 –20°C to +50°C (–4°F to 122°F)
    Storage Temperature –40°C to +70°C (–40°F to 158°F)
    Operating Humidity 20% to 100% (condensing)
    Storage Humidity up to 100%
    Weatherproofing Type 4X (NEMA 4X) and IP67
    Solar Radiation Tested to MIL-STD-810F test standard for solar radiation (for A1 rated environments)
    6. Warm-up period required for cold start at –40°C (–40°F).
    1 Top , 3 , Side
    2 Front , 4 , Rear
    1 Corner Mount - Top , 3 , Pole Mount - Top
    2 Corner Mount - Side , 4 , Pole Mount - Side

    Images

     
    Onvif
     
  • Certificates (3)
     
  • Documents (11)
     
 

Accessories

VG4-A-9541 Pole mount adapter

VG4-A-9541 Pole mount adapter

Pole mount adapter for an AUTODOME pendant arm or a DINION imager, designed for poles with a diameter of 100‑380 mm (4‑15 in.), white

Commercial Type No.: VG4-A-9541
Product No.: F.01U.123.433

 
VG4-A-9542 Corner mount adapter for AUTODOME

VG4-A-9542 Corner mount adapter for AUTODOME

Corner mount adapter for an AUTODOME pendant arm or a DINION imager

Commercial Type No.: VG4-A-9542
Product No.: F.01U.123.434

 
 

VG4-SBOX-COVER COVER FOR PSU BOX

Spare cover for AutoDome power supply boxes and for the VEI-30 and NEI-30 junction boxes

Commercial Type No.: VG4-SBOX-COVER
Product No.: F.01U.075.144