EOL: MIC Series 500 Professional

MIC Series 500 Professional
  • Rated to an industry leading IP68
  • Multiple camera programming through Camset software
  • Many mounting and viewing options
  • Easy set-up and configuration through the powerful on-screen display
  • Multi-protocol operation
  • On-site canting ability
  • Ultra long-life silicone wiper
  • Powerful privacy masking allowing over 900 separate masked zones
  • Details
    Image Sensor 1/4 in. Exview CCD (WDR)
    Effective Pixel Elements PAL: Approx. 440,000; 752(H) x 582(V) NTSC: Approx. 380,000; 768 (H) x 494 (V)
    Horizontal Resolution PAL: 540 TVL NTSC: 520 TVL
    Filter Automatic mechanical IR cut filter
    Focus System Auto or manual
    Iris Auto or manual with slow shutter integration modes
    Synchronization Internal / External (V-Lock)
    Signal-to-Noise Ratio (SNR) 50 dB or more
    Back Light Compensation (BLC) On/Off
    White Balance Automatic
    Automatic Gain Control (AGC) -3 to 28 dB, 2 dB steps
    Aperture Control 16 Steps
    Lens F=4.1 mm (wide) to 73.8 mm (tele), F1.4 to F3.0
    Zoom 18x optical (12x digital)
    Field of View 48° (wide) to 2.8° (tele)
    Minimum Illumination 1/60 s mode, 0.7 lx (typical) (F1.4, 50 IRE) 1/4 s mode, 0.07 lx (typical) (F1.4, 50 IRE)
    Shutter Speed 1/4 to 1/10,000 s (20 steps) NTSC, PAL
    Lens F=3.4 mm (wide) to 122.4 mm (tele), F1.6 to F4.5
    Zoom 36x optical (12x digital)
    Field of View 57.8° (wide) to 1.7° (tele)
    Minimum Illumination 1/60 s mode: 1.4 lx (typical) (F1.6, 50 IRE) 1/4 s mode: 0.1 lx (typical) (F1.6, 50 IRE)
    Shutter Speed 1/4 to 1/10,000 s (20 steps) NTSC 1/3 to 1/10,000 s (20 steps) PAL
    Auto Flip Yes
    Manual Flip Yes
    E-flip Yes, E-flip enables the camera module to invert the image
    Dynamic Privacy Zones 3-D privacy masking with 959 zones
    Presets 64 telemetry presets accurate to 0.08° utilizing resolver technology using the on-screen menu or via Camset, Up to 10 camera module presets (Sony sets) to allow ANPR, color correction etc.
    Preset Tours Four (4) tours each with up to 32 presets
    Pattern Tours Two (2) tours
    Sector Titles 64 sectors, 20 characters per title
    Preset Titles 20-character caption for each of the 64 presets
    Home Position Preset 1 or tour
    On-screen Menu Most camera functions can be accessed through the on-screen menu
    Communication RS485 / RS422
    Control Protocol FV and Bosch protocols pre-installed. Twin protocol packs including FV/Pelco, FV/VCL, FV/American Dynamics and FV/Kalatel can be loaded using the MIC Universal Camera Setup Software Utility (Camset)
    MIC Universal Camera Setup Software Utility (Camset) Supplied free with each camera, Camset allows direct connection to a USB equipped PC via the MIC Series PSU or over a full duplex or IP network to provide access to all camera functions and useful diagnostic tools
    Video Coaxial via composite cable
    Telemetry Twisted pair. Simplex, half and full duplex operation via composite cable
    Power Via composite cable
    Alarm Inputs One (1) tamper input (additional inputs possible with optional alarm card)
    Alarm Communication Tamper switch (ground connection)
    Drive Unit Brushless, integral pan/tilt motor drive
    Pan Angle 360° continuous rotation
    Pan Speed Up to 120° per second (variable)
    Tilt Angle 270°
    Tilt Speed 0.2° to 80° per second (variable)
    Speed Control Closed loop electronics
    Preset Accuracy ±0.17°(typical)
    Proportional Pan/Tilt to Zoom Yes
    Input Voltage 18 VAC
    Power Consumption 25 W max.
    Camera Module 18x camera module or 36x camera module
    Camera Color System NTSC or PAL
    Telemetry Control Card Built-in
    Washer Drive Optional washer kit (MIC-WKT Kit with washer pump drive)
    Privacy Masking Privacy card with up to 959 masks, fitted as standard
    Alarm Card Optional, 8-input with washer pump drive function, fits in MIC Series power supply
    Biphase Converter Optional, fits in MIC Series power supply expansion slot (BP-4)
    Operating Temperature -40 °C to +60 °C (-40 °F to +140 °F)
    Weatherproofing IP68 (1m submersion for 24 hours)
    Dimensions (W x H x D)
    Upright and Inverted 212 x 355 x 177 mm (8.35 x 13.98 x 6.97 in.)
    Canted 212 x 312 x 255 mm (8.35 x 12.28 x 10.0 in.)
    Weight 7 kg (15.43 lb) including 4 in. pitch circle diameter (PCD) base
    Viewing Window Tempered flat glass
    Construction Material Cast solid aluminum
    Standard Colors Black (RAL9005) or white (RAL9010)
    Standard Finish Alocrom 1200 surface treatment with powder coat paint, sand finish
    Window Wiper Standard
    Canting Twist Lock canting secured by two security screws

    Images

     
  • Certificates (3)
     
  • Documents (14)
     
  • Software Downloads (8)
     
 

Accessories

MIC-24PSU-UL 24V AC POWER SUPPLY

24 VAC, 50/60 Hz power supply for MIC Series cameras

Commercial Type No.: MIC-24PSU-UL
Product No.: F.01U.133.033

 

MIC-115PSU-UL 115V AC POWER SUPPLY

115 VAC, 60 Hz power supply for MIC Series cameras

Commercial Type No.: MIC-115PSU-UL
Product No.: F.01U.133.030

 
 

MIC-240PSU-UL 230V AC POWER SUPPLY

230 VAC, 50 Hz power supply for MIC Series cameras

Commercial Type No.: MIC-240PSU-UL
Product No.: F.01U.133.027

 

MIC-ALM Alarm and Washer Pump Drive Card

8 Input alarm and washer pump drive card for PSU (Not for IR PSU)

Commercial Type No.: MIC-ALM
Product No.: F.01U.087.243

 
 

MIC-BP4 Biphase Converter

Biphase converter for non-IR versions of MIC series power supply units

Commercial Type No.: MIC-BP4
Product No.: F.01U.087.142

 

MICUSB485CVTR2 USB to RS485 Signal Converter

USB to RS485 signal converter to allow MIC Series cameras to connect to a PC, supplied with each camera

Commercial Type No.: MICUSB485CVTR2
Product No.: F.01U.170.436

 
 

MIC-501KBD SINGLE CAMERA CONTROLLER

Keyboard controller with 3-axis joystick for 1 camera (FV PROTOCOL ONLY)

Commercial Type No.: MIC-501KBD
Product No.: F.01U.087.284

 

MIC-WKT Washer Kit

Washer kit for non infrared MIC models (includes washer pump drive card, washer nozzle and mounting brackets for wall and 4 in. PCD base)

Commercial Type No.: MIC-WKT
Product No.: F.01U.087.253

 
 

MIC-DCA-WD Deep Conduit Adapter, White

Deep conduit adapter for 4 in. PCD base, white sand finish (RAL9010)

Commercial Type No.: MIC-DCA-WD
Product No.: F.01U.143.152

 

MIC-DCA-BD Deep Conduit Adapter, Black

Deep conduit adapter for 4 in. PCD base, black sand finish (RAL9005)

Commercial Type No.: MIC-DCA-BD
Product No.: F.01U.143.151

 
 

MIC-SCA-WD Shallow Conduit Adapter, White

Shallow conduit adapter for a MIC-WMB, a MIC-PMB, or a MIC-SPR mount, white sand finish (RAL9010)

Commercial Type No.: MIC-SCA-WD
Product No.: F.01U.143.154

 

MIC-SCA-BD Shallow Conduit Adapter, Black

Shallow conduit adapter for a MIC-WMB, a MIC-PMB, or a MIC-SPR, black sand finish (RAL9005)

Commercial Type No.: MIC-SCA-BD
Product No.: F.01U.143.153

 
 

MIC-SPR-WD Spreader Plate, White

Aluminum spreader plate suitable for brickwork surface mounting, white sand finish (RAL9010)

Commercial Type No.: MIC-SPR-WD
Product No.: F.01U.143.163

 

MIC-SPR-BD Spreader Plate, Black

Aluminum spreader plate suitable for brickwork surface mounting, black sand finish (RAL9005)

Commercial Type No.: MIC-SPR-BD
Product No.: F.01U.143.164

 
 

MIC-CMB-WD Corner Mount Bracket, White

Corner mount bracket, white sand finish (RAL9010)

Commercial Type No.: MIC-CMB-WD
Product No.: F.01U.143.159

 

MIC-CMB-BD Corner Mount Bracket, Black

Corner mount bracket, black sand finish (RAL9005)

Commercial Type No.: MIC-CMB-BD
Product No.: F.01U.143.158

 
 

MIC-WMB-WD Wall Mount Bracket, White

Wall mount bracket, white sand finish (RAL9010)

Commercial Type No.: MIC-WMB-WD
Product No.: F.01U.143.156

 

MIC-WMB-BD Wall Mount Bracket, Black

Wall mount bracket, black sand finish (RAL9005)

Commercial Type No.: MIC-WMB-BD
Product No.: F.01U.143.155

 
 

MIC-PMB Pole Mount Bracket

Pole mount bracket (includes 2 x 455 mm stainless steel banding straps for pole diameters 75 to 145 mm)

Commercial Type No.: MIC-PMB
Product No.: F.01U.087.283

 

MIC-2M-S 2 m Shielded Composite Cable

Shielded Composite 2 m cable that provides power, telemetry and video connection from a MIC Series camera to a MIC Series power supply

Commercial Type No.: MIC-2M-S
Product No.: F.01U.132.987

 
 

MIC-10M-S CABLE FOR MIC SERIES 10M SHIELDED

Shielded Composite 10 m cable that provides power, telemetry and video connection from a MIC Series camera to a MIC Series power supply

Commercial Type No.: MIC-10M-S
Product No.: F.01U.132.988

 

MIC-20M-S CABLE FOR MIC SERIES 20M SHIELDED

Shielded Composite 20 m cable that provides power, telemetry and video connection from a MIC Series camera to a MIC Series power supply

Commercial Type No.: MIC-20M-S
Product No.: F.01U.132.989

 
 

MIC-25M-S CABLE FOR MIC SERIES 25M SHIELDED

Shielded Composite 25 m cable that provides power, telemetry and video connection from a MIC Series camera to a MIC Series power supply

Commercial Type No.: MIC-25M-S
Product No.: F.01U.132.990