High‑Speed Positioning System

High‑Speed Positioning System
  • Pans up to 100º per second, 360º continuous rotation
  • Tilts up to 40º per second, -90º to +40º range
  • Choice of DinionXF Color or Dinion 2X Day/Night cameras and motorized zoom lens combinations
  • IP 66 rated, tough, attractive casing with up to 20 kg balanced load
  • Optional Bosch AEGIS UFLED Infrared Illuminator assembly attaches directly to the High-Speed Positioning System for operation in dark environments
  • Multi-protocol including Biphase, Bilinx, Pelco-D, and third party protocols on RS-485
  • Details
    Input Voltage
    Standard System 24 VAC
    IR 360 System 24 VAC
    Power Draw (max.)
    Standard System 5 A
    IR 360 System 8 A
    Input Frequency 50/60 Hz
    Integrated Housing Input Thermostat heater, 24 VAC, 20 W max.
    Camera Input 12 VDC, 800 mA
    Lens Input +6 to +15 VDC, 200 mA
    Wiper (optional) Input 24 VAC, 400 mA
    Illuminator (optional) Input 24 VAC, 2 A + 2 A max.
    Tour Control Autopan; Preset; Patrol
    Presets 250 selectable (max. 99 via keyboard)
    Preset / Area Names 20-character string
    Preset Accuracy 0.02º
    Data Set-up Flash memory
    Serial RS-232, Sub-D for firmware upgrade
    Protocols Bilinx, Biphase, Pelco-D, and third party protocols on RS-485
    Supported Platforms DiBos, Divar, Allegiant
    Max. Addressable Units Bilinx/Biphase: 998 (dipswitch setting) Pelco-D: 255 (dipswitch setting)
    Firmware Upgrades RS-232 interface
    Configuration Modes Via PC or OSD
    Configuration Interface RS-485
    Dimensions (H x W x D) 584 x 258 x 514 mm (23.0 x 10.2 x 20.2 in.)
    Weight Approx. 14 kg (31 lb)
    Mounting Top mount (OTT)
    Color Light grey (RAL 7035)
    Material Die cast and extruded aluminum, ABS
    Rotation
      Horizontal 360º continuous
      Vertical –90º to +40º
    Speed Manual , Patrol / Autopan
      Horizontal (pan)
    Standard System 0.1º to 100º/s , 0.1º to 100º/s
    IR 360 System 0.1º to 40º/s , 0.1º to 40º/s
      Vertical (tilt)
    Standard System 0.1º to 40º/s , 0.1º to 30º/s
    IR 360 System 0.1º to 30º/s , 0.1º to 30º/s
    Static / Dynamic Torque
      Horizontal 20 Nm
      Vertical 20 Nm
    Transmission Toothed belt
    Operating Temperature –20 ºC to +50 ºC (–4 ºF to +122 ºF)
    Storage Temperature –20 ºC to +60 ºC (–4 ºF to +140 ºF)
    Humidity <90% relative humidity (non-condensing)
    Enclosure Protection IP 66
    Camera Model LTC 0485 DinionXF Color, 1/3-inch Digital CCD Camera
    Active Pixels
    NTSC 768 H x 492 V
    PAL 752 H x 582 V
    Sensitivity (3200 k)
    Sensitivity (full video)4 2.4 lux (0.24 fc)
    Sensitivity 50 IRE4 0.59 lux / 0.24 lux (NightSense) (0.059 fc / 0.024 fc (NightSense))
    Minimum Illumination4 0.24 lux / 0.10 lux (NightSense) (0.024 fc / 0.01 fc (NightSense))
    Minimum Illumination with SensUp 0.024 lux / 0.010 lux (NightSense) (0.0024 fc / 0.0010 fc (NightSense))
    Horizontal Resolution 540 TVL
    Signal-to-Noise-Ratio > 50 dB
    Video Output 1 Vpp, 75 Ohm
    Y/C Output Y: 1 Vpp / C: 0.3 Vpp
    Synchronization Internal, Line Lock, HV-lock and genlock (Burst lock) selectable
    Electronic Shutter Auto (1/60 [1/50] to 1/500000), fixed, flickerless, default
    SensUp Off, automatic continuous up to 10x
    Auto Black On, off selectable
    Range 32x dynamic range enhancement
    Dynamic Noise Reduction Auto, off selectable
    Contour Sharpness enhancement level selectable
    BLC Off, area and level selectable
    Gain Auto (maximum level selectable to 28 dB) or fixed level selectable
    White Balance ATW (2500–10000 K), AWB hold, manual WB selectable
    VMD Four (4) area, sensitivity selectable
    Alarm Output VMD or Bilinx
    Alarm Input (TTL) Profile switching, +5 V nominal, +40 VDC max.
    Alarm Output Relay Max. 30 VAC or +40 VDC, max. 0.5 A continuous, 10 VA
    External Synchronal Input 75 Ohm or High Impedance selectable
    Cable Compensation Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with coaxial communication)
    Camera ID 16-character editable string, position selectable
    Remote Control Bi-directional coaxial communication
    Camera Model LTC 0498 Dinion 2X Day/Night, 1/3-inch Digital CCD Camera
    Active Pixels
    NTSC 768 H x 494 V
    PAL 752 H x 582 V
    Sensitivity (3200 K, scene reflectivity 89%, F1.2)
    Full video (100 IRE) Usable picture (50 IRE) , Usable picture (30 IRE)
    Color 2.4 lx (0.24 fc) , 0.59 lx (0.059 fc) , 0.24 lx(0.024 fc)
    Color + SensUp 10x 0.24 lx (0.024 fc) , 0.059 lx (0.0059 fc) , 0.024 lx (0.0024 fc)
    Monochrome - , 0.08 lx (0.008 fc) , 0.038 lx (0.0038 fc)
    Monochrome + SensUp 10x - , 0.008 lx (0.0008 fc) , 0.0038 lx (0.00038 fc)
    Horizontal Resolution 540 TVL
    Signal-to-Noise Ratio >50 dB
    Video Output Composite video 1 Vpp, 75 ohm
    Synchronization Internal, Line Lock, HV-lock and Genlock (Burst lock) selectable
    Shutter Auto (1/50 [1/60] to 1/10000) selectable Auto (1/50 [1/60] to 1/50000) automatic flickerless, fixed selectable
    SensUp Adjustable from Off up to 10x
    Day/Night Color, Mono, Auto
    Auto Black Automatic continuous, Off
    Dynamic Engine XF-Dynamic, 2X-Dynamic, SmartBLC
    Dynamic Range 120 dB (20-bit image processing)
    Dynamic Noise Reduction Auto, On/off selectable
    Sharpness Sharpness enhancement level selectable
    SmartBLC On/Off
    AGC AGC On/Off (0 dB) selectable
    Peak White Invert On/Off
    White Balance ATW, ATWhold and manual (2500–10000 K)
    Alarm Output VMD or Bilinx
    Alarm Input (TTL) Profile switching, +3.3 V nominal, +40 VDC max.
    Alarm Output Relay 30 VAC or +40 VDC, max. 0.5 A continuous, 10 VA
    External Synchronization Input 75 Ohm or High Impedance selectable
    Cable Compensation Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with Bilinx coaxial communication)
    Camera ID 17-character editable string, position selectable
    Test Pattern Generator Color bars 100%, Grayscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane
    Modes Six (6) preset programmable modes
    Remote Control Bilinx coaxial bi-directional communication
    Video Motion Detection One area, fully programmable
    Controls OSD with soft-key operation (multi-lingual)
    Camera Model LTC 0610 DinionXF Color, 1/2-inch Digital CCD Camera
    Active Pixels
    NTSC 768 H x 492 V
    PAL 752 H x 582 V
    Sensitivity (3200 k)
    Sensitivity (full video)5 1.4 lx (0.14 fc)
    Sensitivity 50 IRE5 0.35 lux / 0.14 lux (NightSense) (0.035 fc / 0.014 fc (NightSense))
    MinimumIllumination5 0.18 lux / 0.08 lux (NightSense) (0.018 fc / 0.008 fc (NightSense))
    Minimum Illumination with SensUp 0.018 lux / 0.008 lux (NightSense) (0.0018 fc / 0.0008 fc (NightSense))
    Horizontal Resolution 540 TVL
    Signal-to-Noise-Ratio > 50dB
    Video Output 1Vpp, 75 Ohm
    Y/C Output Y: 1 Vpp / C: 0.3 Vpp
    Synchronization Internal, Line Lock, HV-lock and Genlock (Burst lock) selectable
    Shutter Auto (1/60 [1/50] to 1/500000), fixed, flickerless, default
    Night Sense Auto, Forced, Off
    SensUp Off, automatic continuous up to 10x
    Auto Black On/Off selectable
    Dynamic Range 32x dynamic range enhancement
    Dynamic Noise Reduction Auto, Off selectable
    Contour Sharpness enhancement level selectable
    BLC Off, area and level selectable
    Gain Auto (maximum level selectable to 28 dB) or fixed level selectable
    White Balance ATW (2500–10000 K), AWB hold, manual WB selectable
    VMD Four (4) area, sensitivity selectable
    Alarm Output VMD or Bilinx
    Alarm Input (TTL) Profile switching, +5 V nominal, +40 VDC max.
    Alarm Output Relay Max. 30 VAC or +40 VDC, max. 0.5 A continuous, 10 VA
    External Synchronal Input 75 Ohm or High Impedance selectable
    Cable Compensation Up to 1000 m (3000 ft) coax without external amplifiers (automatic setup in combination with coaxial communication)
    Camera ID 16-character editable string, position selectable
    Remote Control Bi-directional coaxial communication
    Camera Model LTC 0630 Dinion 2X Day/Night, 1/2-inch Digital CCD Camera
    Active Pixels
    NTSC 768 H x 494 V
    PAL 752 H x 582 V
    Sensitivity (3200 K, scene reflectivity 89%, F1.2)
    Full video (100 IRE) Usable picture (50 IRE) , Usable picture (30 IRE)
    Color 1.4 lx (0.14 fc) , 0.31 lx (0.031 fc) , 0.18 lx(0.018 fc)
    Color + SensUp 10x 0.14 lx (0.014 fc) , 0.031 lx (0.0031 fc) , 0.018 lx (0.0018 fc)
    Monochrome - , 0.052 lx (0.0052 fc) , 0.024 lx (0.0024 fc)
    Monochrome + SensUp 10x - , 0.0052 lx (0.00052 fc) , 0.0024 lx (0.00024 fc)
    Horizontal Resolution 540 TVL
    Signal-to-Noise Ratio >50 dB
    Video Output Composite video 1 Vpp, 75 ohm
    Synchronization Internal, Line Lock, HV-lock and Genlock (Burst lock) selectable
    Shutter Auto (1/50 [1/60] to 1/10000) selectable Auto (1/50 [1/60] to 1/50000) automatic flickerless, fixed selectable
    SensUp Adjustable from Off up to 10x
    Day/Night Color, Mono, Auto
    Auto Black Automatic continuous, Off
    Dynamic Engine XF-Dynamic, SmartBLC
    Dynamic Range 96 dB (16-bit image processing)
    Dynamic Noise Reduction Auto, On/Off selectable
    Sharpness Sharpness enhancement level selectable
    SmartBLC On/Off
    AGC AGC On/OffOff (0 dB) selectable
    Peak White Invert On/Off
    White Balance ATW, ATWhold and manual (2500–10000 K)
    Alarm Output VMD or Bilinx
    Alarm Input (TTL) Profile switching, +3.3 V nominal, +40 VDC max.
    Alarm Output Relay 30 VAC or +40 VDC, max. 0.5 A continuous, 10 VA
    External Synchronization Input 75 Ohm or High Impedance selectable
    Cable Compensation Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with Bilinx coaxial communication)
    Camera ID 17-character editable string, position selectable
    Test Pattern Generator Color bars 100%, Greyscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane
    Modes Six (6) preset programmable modes
    Remote Control Bilinx coaxial bi-directional communication
    Video Motion Detection One (1) area, fully programmable
    Controls OSD with soft-key operation (multi-lingual)
    Model L8585 (LTC 3783/51)
    10x optical f=8.5 (wide) to 85.0 mm (tele), F1.6
    Angle of view (H) 31.3° (wide) to 3.3° (tele)
    Model L8120 (LTC 3293/30)
    15x optical f=8.0 (wide) to 120.0 mm (tele), F1.6
    Angle of view (H) 32.5° (wide) to 2.3° (tele)
    Model L86154 (LTC 3793/51)
    18x optical f=8.6 (wide) to 154.0 mm (tele), F2.5
    Angle of view (H) 30.5° (wide) to 1.82° (tele)
    LEDs High-efficiency LED array with current limited integral power circuit
    Number of LEDs 18 high-efficiency surface mount LEDs
    Beam Patterns 10°, 20°, or 30°
    Wavelength 850 nm
    Power Draw 26 to 45 W (45 W max. power). Power consumption will vary over time due to the infrared illuminator’s optical output control which compensates for LED degradation and ambient temperature fluctuations.
    Input Voltage 12 to 40 VDC or 24 VAC ±30%
    Temperature Range –50°C to +50°C (-58°F to +122°F) max. on full power
    Environment IP67
    Construction Robust, aluminum construction with acrylic front fascia
    Weight 1.4 kg (3.1 lb)
    Dimensions(Single Illuminator) 152 x 188 x 115 mm (6.0 x 7.4 x 4.5 in.)
    Color Black anodized heat sink with black front fascia
    Power Cable Supplied with IP67 power connector and 5 m (16.4 ft) of connecting lead.
    Bracket Wall mount U-bracket supplied
    Model Combination Beam Pattern , Achievable Distance6
    UFLED10-8BDUFLED10-8BD 10° 10° , 267 m (876 ft)
    UFLED10-8BDUFLED20-8BD 10° 20° , 230 m (755 ft)
    UFLED10-8BDUFLED30-8BD 10° 30° , 218 m (715 ft)
    UFLED20-8BDUFLED20-8BD 20° 20° , 180 m (590 ft)
    UFLED20-8BDUFLED30-8BD 20° 30° , 168 m (551 ft)
    UFLED30-8BDUFLED30-8BD 30° 30° , 132 m (433 ft)

    Images

     
  • Documents (6)
     
  • Software Downloads (2)
     
 

Product variants

UPH-C630P-L8120 Camera/Lens Assembly

LTC 0630 Dinion 2X 1/2 in. PAL day/night camera with an LTC 3293/30 8‑120 mm zoom lens

Commercial Type No.: UPH-C630P-L8120
Product No.: F.01U.261.962

 
UPH-C630P-L8585 Camera/Lens Assembly

LTC 0630 Dinion 2X 1/2 in. PAL day/night camera with an LTC 3783/51 8.5‑85 mm IR-corrected lens

Commercial Type No.: UPH-C630P-L8585
Product No.: F.01U.261.963

 
 
MTC‑PUPH Outdoor Pole Mount

for mounting a UPH series unit to the top of a pole

Commercial Type No.: MTC-PUPH
Product No.: F.01U.029.233

 
MTC‑WUPH Outdoor Wall Mount

for UPH series

Commercial Type No.: MTC-WUPH
Product No.: F.01U.029.234

 
 
MTC‑CORN‑W Corner Adapter for MTC‑WUPH

Commercial Type No.: MTC-CORN-W
Product No.: F.01U.030.361

 
MTC‑POLE‑W Pole Adapter for MTC-WUPH

for mounting a UPH series unit to the side of a pole

Commercial Type No.: MTC-POLE-W
Product No.: F.01U.030.360

 
 

Accessories

UFLED10-8BD AEGIS Illuminator

Intelligent-IR 850 nm illuminator. IP67; LED array; Constant Light technology; 3D Diffuser; black; 40 m HFOV; 220 m distance; 10º beam pattern

Commercial Type No.: UFLED10-8BD
Product No.: F.01U.132.323

 

UFLED20-8BD AEGIS Illuminator

Intelligent-IR 850 nm illuminator. IP67; LED array; Constant Light technology; 3D Diffuser; black; 55 m HFOV; 150 m distance; 20º beam pattern

Commercial Type No.: UFLED20-8BD
Product No.: F.01U.132.324

 
 

UFLED30-8BD AEGIS Illuminator

Intelligent-IR 850 nm illuminator. IP67; LED array; Constant Light technology; 3D Diffuser; black; 60 m HFOV; 110 m distance; 30º beam pattern

Commercial Type No.: UFLED30-8BD
Product No.: F.01U.132.325

 

UFLED-CL-1M CABLE FOR UFLED (1 METER)

1 m (3.3 ft) telemetry link cable for Aegis illuminators

Commercial Type No.: UFLED-CL-1M
Product No.: F.01U.080.135