Praesideo Peripherals


 
PRS‑NSP Network Splitter
  • Two current-limited network tap-offs
  • Supports redundant network connection on main loop
  • Can feed power from an external supply to the network
  • Indicators for power and fault status
 
 
PSP-D00039 Master and PSP-D00040 Slave RCS
  • Redundant network controller switch pair
  • Supports redundant network connection on main loop
  • Can feed power from an external supply to the network
  • Indicators for power and fault status
 
 
PRS‑FIN, PRS‑FINNA and PRS‑FINS Fiber Interfaces
  • Redundant network connection
  • Indicators for power and fault status
  • Two supervised control inputs (not PRS‑FINNA)
  • Can use a local power supply
 
 
LINE SUPERVISION SET
  • Loudspeaker line monitoring without additional cabling
  • Supervision-master mounting in the power amplifier
  • Supervision-slave mounting at the end of the loudspeaker line
  • Open-circuit fault detection
  • Compatible with 100 V and 70 V loudspeaker lines
  • Supervision-slave powered from the power amplifier
 
 
SUPERVISION CONTROL BOARD
  • Multiple speaker and line monitoring without additional cabling
  • Mounted inside the power amplifier
  • Controls up to 80 speaker and line supervision boards
  • Open-circuit fault detection
  • Compatible with 100 V and 70 V loudspeaker lines
 
 
LSP SUPERVISION BOARD
  • Loudspeaker and loudspeaker line monitoring without additional cabling
  • Open-circuit fault detection
  • Compatible with 100 V and 70 V loudspeaker lines
  • Powering of the supervision-board from the power amplifier
  • Communication is not affected by the audio signals on the loudspeaker line
 
 
EOL SUPERVISION BOARD
  • Loudspeaker line monitoring without additional cabling
  • Open-circuit fault detection
  • Compatible with 100 V and 70 V loudspeaker lines
  • Powering of the supervision-board from the power amplifier
  • Communication is not affected by the audio signals on the line
 
 
PLN‑24CH12 24 V and PRS‑48CH12 48 V Battery Chargers
  • 12 A battery charger
  • 6x 40 A, 3x 5 A outputs
  • 150 A back‑up current
  • Fully supervised, EN 54‑4 certified
  • Under‑voltage and over‑voltage protection